ROAM X Campervan Internet Antenna - black

About the free ROAM X app for Android and IOS operating systems, the router is easy and quick to configure.

The standard installation is done with a cable feed through the roof directly under the antenna. With a Kunststsoffhohlschraube, through which the cables also go, the antenna is attached to the roof from the inside. The self-adhesive foam pad seals the antenna. A hole of 25 mm is required for the plastic screw. The attachment is suitable for roof thicknesses of 10 - 50 mm.

Which SIM card provider recommends Maxview?

Use only SIM cards from reputable providers such as Vodafone, Telekom, etc.. SIM cards from discounters can also be used, but gestaltetet the activation of the card often difficult. Note that German prepaid cards lose data volume after 30 days. They must then be reloaded.

Use abroad the most common SIM card in the respective country. This saves an enormous amount of money and the data transfer is also faster and more stable. The replacement is as easy as inserting the SIM card into your smartphone.

Maxview Roam App:

The Maxview Roam App is designed for easy and efficient control of Maxview Roam. Our Maxview Roam App is now available for our customers to download free of charge from the App Store & Google Play Store.

The following are the key features our Maxview Roam App has:

• Enable sim card
• Establish WLAN connection
• App settings
• Change SSID, IP address and WLAN password
• View data usage, incl. SMS alert and mobile data limit
• Family browsing, for a family-friendly browsing experience
• Manually change APN

Specifications:

Type: omnidirectional MIMO

Frequency: 698MHz to 6000MHz covers the frequencies of 4G u. 5G

Gainting: 5.9dBi - 8.8 dBi

Cable length: 0.8m

Material: Aluminum base plate, UV stable ASA cover

Dimensions: h.: 65 mm        w.: 180 mm       t.: 60 mm

Router:

Mobile: 4G(LTE) - CAT6 DL up to 300 Mbps, Ul up to 50 Mbps

Ethernet: 3 x LAN ports 10/100/1000 Mbps, 1 x WAN port

WiFi: 2.4 GHz and 5 GHz 802.11 ac (WiFi 5)

Power supply: 9 - 50 V 4 PIN connector

Current consumption: approx. 400 mA

Connectors: 4 PIN power connector, 4 x Ethernet, 2 x SMA for LTE, 2 x WiFi RP-SMA, 1 x SMA for GNSS, 1 x RP-SMA for Bluetooth. USB port

SIM card: 2 x SIM card slots for standard SIM cards

Status LEDs: 1 x power, 3 x mobile connection type (2G/3G/4G), 5 X signal strength, 2 X WiFi band (2.4/5 GHz), 8 x Ethernet status, 4 X WAN type LEDs

Operating temperature: -40°C - 75°C

Casing: aluminum

Weight: 456 g

Dimensions: H: 115 x W: 95 x D: 44 mm