Search results carbest
No results were found for the filter!
Remote Control for Carbest Inverter
81949
Remote Control with cable (4,5m) for the folling Carbest Inverter (item-no.'s:)822802, 822803, 82281, 822812, 822811
Carbest remote control for inverters with 5m cable
81948
Carbest remote control for inverters with 5m cable. The inverter is often installed e.g. under a seat. Then this practical remote control is almost indispensable for switching the inverter on and off or for displaying the functionality. With the 5m long cable, the remote control is always at hand, even for longer vehicles.
82281st Inverter 12/230V 400W with USB connection
822810
carbest inverter 12/230V 400W with USB connection
Carbest Remote Control for Carbest Inverter (from 2019)
81947
Cable remote control with 5m cable for inverters 82282 - 82286.
€24.90
*
not in stock, can be ordered
in approx. 3 - 4 months available
in approx. 3 - 4 months available
Currently not in stock, can be ordered
in approx. 3 - 4 months available
in approx. 3 - 4 months available
Carbest inverter Traveller 200W with USB
82290
inverter Traveller 200W with USB, cigarette lighter plug
Sinus Power Inverter
82281
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
Sinus Power Inverter
82282
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
Sinus Power Inverter
82283
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
Sinus Power Inverter
82285
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
Sinus Power Inverter
82286
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
Sinus Power Inverter with mains priority circuit - 1000 to 2000 watts
82279
Integrated 230 volt mains priority circuit: As soon as 230 volt shore power (e.g. from the campsite) is available, the inverter operation is automatically interrupted. The inverter operation again immediately resumed as soon as no more outside power is available. Integrated 3-stage battery charger for gel and AGM batteries with 10 A or 15 A (model-dependent). Spare / extension cable: ± 25 mm², 2 x 200 cm Art. no. 81940 (With 2 ring eyelets pre-assembled) ± 50 mm², 2 x 200 cm...
Extra connection cable +/- 25mm2 in 2m length
81940
Prefabricated with 2 eyelets Prefabricated with 2 eyelets ± 25 mm2, 2 x 200 cm
Extra connection cable +/- 50mm2 in 2m length
81941
Prefabricated with 2 eyelets. ± 25 mm2, 2 x 200 cm
Sinus Power Inverter
82284
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
Sinus Power Inverter with mains priority circuit - 1000 to 2000 watts
82277
Integrated 230 volt mains priority circuit: As soon as 230 volt shore power (e.g. from the campsite) is available, the inverter operation is automatically interrupted. The inverter operation again immediately resumed as soon as no more outside power is available. Integrated 3-stage battery charger for gel and AGM batteries with 10 A or 15 A (model-dependent). Spare / extension cable: ± 25 mm², 2 x 200 cm Art. no. 81940 (With 2 ring eyelets pre-assembled) ± 50 mm², 2 x 200 cm...
€224.00
*
Limited availability. Ready for immediate shipment, delivery time 5-8 days
in stock
Sinus Power Inverter with mains priority circuit - 1000 to 2000 watts
82278
Integrated 230 volt mains priority circuit: As soon as 230 volt shore power (e.g. from the campsite) is available, the inverter operation is automatically interrupted. The inverter operation again immediately resumed as soon as no more outside power is available. Integrated 3-stage battery charger for gel and AGM batteries with 10 A or 15 A (model-dependent). Spare / extension cable: ± 25 mm², 2 x 200 cm Art. no. 81940 (With 2 ring eyelets pre-assembled) ± 50 mm², 2 x 200 cm...