Additional air springs - 2-circuit basic set MB Sprinter 409-524/VW Crafter 35-5

Effectively relieves the rear of the vehicle - reduces the tendency to roll

: Additional air springs - 2-circuit basic set MB Sprinter 409-524/VW Crafter 35-5

2-circuit system with double bellows for the rear axle
new in our assortment
best also order now: Art. no. 46563 Monitoring of operating pressure
the additional air suspension at 2 manometers
As an alternative to the pressure kit, you can also use our compressor kit, the self-sufficient
Order complete accessory package (Art.No.465632):
With the self-sufficient complete accessory package, you can even increase the ride height during
and regulate the air pressure in the spring system at 2 pressure gauges.
keep tabs on sb./sth.

759.00€

Prices incl. VAT plus shipping costs

not in stock, can be ordered
in approx. 1 - 2 months available

Currently not in stock, can be ordered

Art.no.: 465612

Art.no.: 465612

In vehicles with leaf suspension, an air bellows is mounted between the frame and the rear axle... mehr

Menü schließen

In vehicles with leaf suspension, an air bellows is mounted between the frame and the rear axle to support the existing leaf springs. The VB-SemiAir is supplied as a two-chamber system, so the air bellows are not connected to each other. 2circuit systems ensure that small charging differences can be compensated for separately on the left and right. The VB-SemiAir is supplied with a drain/fill valve for this purpose. Explanation Single/two-circuit system: Single-circuit system : Both bellows are connected to each other. They are filled via a common line. With the 1-circuit system, only one manometer is required to monitor the entire air pressure in the system. A single-circuit system is only suitable if the wheel loads on the rear axle are identical on both sides and the load on the vehicle is completely uniform. Dual-circuit system: The air bellows on the left and right are both separate and can therefore be filled with different pressures. 2 pressure gauges are required to monitor the pressure. Due to the possibility of varying the pressure separately, load-dependent wheel load differences can easily be compensated for in 2-circuit systems. Inclinations can be compensated for

Scope of delivery: 2 bellows with mounting supports, filling valves, air couplings and connecting couplings, air line(s), brake adjustments (if necessary), installation instructions, TÜV approval

Weiterführende Links "Additional air springs - 2-circuit basic set MB Sprinter 409-524/VW Crafter 35-5"