- Can be used as cavity sealant, wax underbody protection (not on wooden floors) and as temporary rust protection
- High temperature resistance up to 180°C
- Good corrosion protection
- High creep capacity
- Low odor
- Does not attack paints
- For places with low stone chipping and little abrasion
- Free from aromatics and bitumen
- White transparent color after drying
- Long shelf life up to two years
Prices incl. VAT plus shipping costs
- Art.no.: 50106
Application
- Cavity protection (in chassis, doors)
- Corrosion protection of steel parts (such as folds, sheet metal overlaps, sills, frame parts)
- Protection of spot welds in the engine compartment, strut bolts and water drains
- Temporary rust protection of machine parts, Tools, garden and agricultural equipment
- For difficult to reach places where corrosion protection is required
- On places that should be protected against corrosion and are not subject to abrasion and stone chipping
- Sprayable corrosion protection and cavity sealingCavity protection (in chassis, Doors)
- Corrosion protection of steel parts (such as folds, sheet metal overlaps, sills, frame parts)
- Protection of spot welds in the engine compartment, on strut bolts and water drains
- Temporary rust protection of machine parts, tools, Garden and agricultural equipment
- For difficult to reach places where corrosion protection is required
- On places that are to be protected against corrosion and are not subject to abrasion and stone chipping
Application
Shake well before use. The surface to be treated must be clean, dry, free of rust, dust and grease. The optimum distance when spraying is about 30 cm. Spray the surface with DEKAPHON PRO-WAX until a layer of the desired thickness is obtained. If thicker coats are desired, it is recommended to allow the coats to dry in between. The product can be sprayed on without streaking or wetting and it does not drip. Turn can upside down after use and spray briefly to clean spray head. Dirty surfaces and contaminated fixtures can be easily restored to a "fresh" condition with solvent. The recommended application temperature is between 15°C and 25°C.
- 1 500 ml spray can
Content in litres: | 0.5 l |
H220 : Extremely flammable gas.
H222 : Extremely flammable aerosol.
H225 : Highly flammable liquid and vapour.
Danger
H226 : Flammable liquid and vapour.
H229 : Pressurised container: May burst if heated.
H412 : Harmful to aquatic life with long lasting effects.
EUH 066 : Repeated exposure may cause skin dryness or cracking.
EUH 208 : Contains Calciumsulfonat. May produce an allergic reaction.
H280 : Contains gas under pressure
H304 : May be fatal if swallowed and enters airways.
H315 : Causes skin irritation.
H317 : May cause an allergic skin reaction.
H332 : Harmful if inhaled.
H336 : May cause drowsiness or dizziness.
H318 : Causes serious eye damage.
H331 : Toxic if inhaled.
H400 : Very toxic to aquatic life.
H410 : Very toxic to aquatic life with long lasting effects.
H411 : Toxic to aquatic life with long lasting effects.
930090
810220
66028
50074
47815
49859
in 7 day(s)
49858
Available in approx. 2 week(s)
49854
Available in approx. 2 week(s)
49855
Available in approx. 3 week(s)
850390
810220
61521
61519
50107
49861
49860
49857
500318
M49843
59659
M10521
500302
M29355
M928081
M440498
583282
101051
58328
58326
M467691
in 7 day(s)
M46896
Available in approx. 2 week(s)
M46916
M46564
in 7 day(s)