Tank electrode Votronic 12-24 K, incl. seal, union nut PG 29 and operating instructions.

• incl. sealing ring & union nut

The VOTRONIC Switch Units operate on the basis of a bistable power relay. Their own consumption is extremely low. They are particularly suitable as remote-controlled main switches or as load relays, which should remain switched on for a long time. The current carrying capacity is 100 A.

Control and monitoring unit for VBCS Triple chargers. It displays the status of the individual charging sources, the current charging phase, the voltage of the on-board and starter batteries and the current charging current. In solar operation, the displays for the current solar output (W) and an energy counter for Wh and Ah with reset function are also available. The mains charging mode of the VBCS Triple can be manually switched on or off or reduced in power (AC power limit) at the touch of a button, e.g. when the shore power connection is weakly fused. A special protective function ensures that an accidentally switched off mains charge is reactivated if the on-board battery runs the risk of being deeply discharged. The large, clear display has a white illuminated and easy to read graphic display with very low power consumption. The device can also be easily retrofitted at any time via the Plug and Play connection and matches the Votronic modular system in terms of design and construction.

• Comfortable and easy to use
• For the chargers of the VBCS Triple series
• Graphic display with large display
• Charging current display of the active charging source
• Voltage indicator for on-board and starter battery

MPP solar controller for high quality motorhomes, caravans and boats. Votronic solar controllers of the series "MPP" (Maximum-Power-Point) with "IU1oU2" charging characteristic are connected as a link between solar panel(s) and battery(s). With MPP technology, the controller continuously and automatically determines the maximum power point (MPP) of the solar panels several times per second. It then transforms the excess voltage of the solar module to a higher charging current for the battery (realized by high frequency switching controller technology with high efficiency). This charging current gain ensures shorter charging times and the best possible power utilization of the solar system. The MPP solar controllers operate fully automatically, are maintenance-free and offer the following functions:

• MPP charge current increase compared to conventional controllers by using the latest controller technology (microprocessor) by 10% to 30% (efficiency > 95%). The performance plus shows in particular to the cooler season and e.g. in high snow, lower and diffuse lighting (wintering).
• For charging lead-gel, lead-AGM, lead-acid batteries or LiFePO4 complete batteries (with integrated BMS, balancing, safety circuit and approval!) of the specified nominal voltages and the co-supply of consumers connected to these batteries in permanently installed systems with the specified battery capacities and charging programs.
• The charging voltage is free of peaks and regulated so that overcharging of the batteries is excluded.
• Two battery charging outputs: Automatic charging of the main supply on-board battery (BORD I) and support charging and charge maintenance (max. 1 A) of the vehicle starter battery (Start II) with protection against overcharging.
• Monitoring-free charging: Standard protection against overload, overheating, reverse polarity and battery back discharge (in case of too low solar power e.g. twilight, at night, etc.).
• Parallel / buffer operation: Compliance with the charging regulations even with simultaneous operation of consumers.
• Overcharge protection: Regulates the charging current of the battery with too much solar power and full battery back, provides for power consumption by immediate recharging for the highest possible state of charge of the battery.
• "IU1oU2" charging characteristic: Defined charging voltage increase (U1) prevents harmful acid stratification (lead) and provides for equalization charging of the individual battery cells (lead and lith.), then automatic trickle charge (U2).
• Charge cable compensation: Voltage losses on the charging cables are automatically compensated.
• Bordnetzfilter: Problem-free parallel operation with wind and motor generators, mains chargers, alternators, etc..
• CI-Bus connection: to display all relevant data on a central vehicle display
• Measurement output for EBL, possibly existing electrical block in the living area of the vehicle: Allows the convenient use of a built-in (solar) current display in the electrical block to control the solar system.
• Please check in advance necessarily the compatibility of your Schaudt electrical block (EBL) and the corresponding control and display panel, as we can not assume any warranty for this.
• Switching output "AES" (only MPP 260 CI, MPP 360 CI and MPP 440 CI): Causes the automatic switching of refrigerators with "AES" (Automatic Energy Selector, Electrolux / Dometic) from gas to 12 V operation in the event of permanently abundant solar power surplus.
• Connection for battery temperature sensor (Art. No. 2001): For lead-acid batteries, the automatic adjustment of the charging voltage to the battery temperature, causes a better full charge of the weaker battery in cold weather, in summer temperatures unnecessary battery gassing and load is avoided.
• LiFePO4 batteries: Battery protection at high and especially at low temperatures.Absolutely recommended if the battery temperature can fall below 0 ° C during operation.
• Plug ready for connection of the Votronic solar display devices LCD-Solar Computer S for optimal control of the system.

Further specifications:

• Nominal battery voltage (AC) in [V]: 12
• Solar module power max [Wp]: 360
• Solar module current max [A]: 21
• Solar module voltage max [V]: 60
• Charge current Batt. I / II max. [A]: 26.0 / 1.5
• Charge characteristic: IU1oU2
• Battery type adjustable: acid, gel, AGM, LiFePO4
• Own consumption in [A]: 0.004
• Overcharge protection: yes
• Back current lock (night operation): yes
• Bordnet filter: yes
• Number of charge outputs: 2
• Protection against overload, overheating, reverse polarity: yes
• Port temperature sensor: yes
• Compensation of voltage losses on the charging cables: yes
• Port LCD solar computer S: yes
• Output EBL solar current display: yes
• Temperature range [°C]: -20 to +45

• Up to 360 Wp module power
• Max. 21 A module current
• Max. 60 V module voltage
• Charging possibilities: 1 supply and 1 starter battery
• 4 loading programs

Fecal tank electrode 20 K-WC - tan k electrode for WC-cartridge tanks with dirt insesitive measuring method incl. mounting ring for mouting opening Ø38mm. Waterproof and very robust (IP67).

• Waterproof
• Particularly robust
• With mounting ring for mounting opening of Ø38mm.

For optimizing the charging. Recommended by REIMO, suitable as from controller SR 130.

• Temperature sensor for Carbest chargers

Solar computer 12V for all Votronic solar charging regulator. The VOTRONIC Power Control (VPC) is an innovative multi-panel-system for motor homes which puts the most important functions and information together in one device user-friendly. The information will be presented by a light, white illuminated graphical display. Its high-quality technology, its modern silver coloured design and the compact construction carry on the positive features and success of the Info Panel Pro. The self-explaining symbols allow an intuitive operation, whereby the prominently displayed data can be read excellently even from larger distance. Coloured light diodes signalize the selected function at any time. All three versions (Terra, Luna and Mars) have the following basic functions: voltage display in V of the vehicle and starter battery with undervoltage protection for the vehicle battery, level indicator in % for fresh water and waste water tank. Main switch for the board supply via the switch output 1A. Switch for the fresh water pump, max. 16A (floatingly output) Additionally to these basic functions the three versions are differentiated by the following additional functions: Solar computer Actual solar capacity in Watt Actual solar current in A Charged solar capacity in Ah Charged solar energy in KWh.

• Battery voltage: on-board & starter battery
• Level indicator: Fresh & waste water tank
• Main switch - Function
• Undervoltage protection for the on-board battery
• pump master switch
• Solar Computer 12V VPC Terra

Remote control/control panel for Votronic charging converters. 5 m cable included

Switching electrical units and securing circuits and, according to one's wishes putting together and marking proper individually. These are the features of these control units and switchgears. Equipped with automatic fuses the annoying search for the fitted replacement fuse has an end. As per push of a button the operational readiness is recuperated again. The versatile utilisation possibilities allow the user in putting together a complete motor home control center.

• Robust main switch with 20A overcurrent switch (automatic circuit breaker)
• Thermal triggering, high overload capacity for short periods of time
• Tripping at more than 20 A continuous current with backlash of the rocker switch
• suitable for 12 V and 24 V

For the proper marking of switches and fuses, international understandable caption sheet. This pictrogram-foil is transparent, self-adhesive and suitable to the VOTRONIC front panel design abrasion-proof imprinted.

• black printed, transparent, suitable for light/silver surfaces
• pre-punched, abrasion-resistant, dimensions of pictograms approx. 12x10 mm

The VOTRONIC Switch Units operate on the basis of a bistable power relay. Their own consumption is extremely low. They are particularly suitable as remote-controlled main switches or as load relays, which should remain switched on for a long time. The current carrying capacity is 40 A.

• Simple control via simple ON / OFF switch
• High switching currents, briefly highly overloadable
• Externally visible switching status display
• Automatic switch-off at undervoltage 8.5 V