Performance is significantly higher than comparable modules, especially at high temperatures. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens the installation time and, at 6/8 m long, is also sufficient for large vehicles. The above-average bendability also makes the Carbest modules ideal for maritime applications. We recommend an MPPT charge controller (e.g. 851005 or 851006)

Note on article 85333 (160 watts): Shorter panel dimensions due to connection box on the rear.

cover layer material:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Backing sheet material:

• TPT: Material with high flexural strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells.

Installation instructions:

All Flex modules must be fully bonded (without air pockets). All module edges must then be completely sealed up to the top cover layer.

• The 135 W PowerPanel SFX135 is a semi-flexible solar panel with a new material composition. The SUNPOWER high-performance cells are mounted on a stable, black fiberglass carrier plate, which is encased by an extremely resistant ETFE layer. This ETFE film is located on both the front and back of the module and is welded together at the edge. This structure provides optimum protection for the cells inside and makes the PowerPanel SFX135 extremely robust against scratches, heat, high humidity and sea and salt water.

Carbest MPPT solar charge controller 12 V / 12 A / max. 165 W (Art.No. 851005)

• Bluetooth-enabled MPPT charge controller, data display via app or separate monitor
• Improved version: From now on the fuse is accessible from the outside
• Bluetooth function only in conjunction with the Bluetooth module from Carbest (Art.-.No. 851007) (Free App for Android and iOS)
• Battery type adjustable: GEL, lead-acid, AGM, LiFePO4 batteries
• Two battery outputs

Scanstrut roof grommet plastic 6-10 mm (Art.-No. 85258)

• Made of glass-fiber reinforced plastic (nylon, particularly impact resistant). Extremely robust construction. They withstand even the harshest conditions such as storms and salt water. The manufacturer promises 100% tightness when properly installed. Due to the split seal, a problem-free plug feed-through is guaranteed.
• The special feature of this cable feed-through: Alternatively, you can also get undrilled seals to customize them yourself. Best proven with high quality.

Further specifications:

• Dimensions mm (LxWxH) (junction box H): 1235 x 540 x 4 (approx. 22 )

Performance is significantly higher than comparable modules, especially at high temperatures. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens the installation time and, at 6/8 m long, is also sufficient for large vehicles. The above-average bendability also makes the Carbest modules ideal for maritime applications. We recommend an MPPT charge controller (e.g. 851005 or 851006)

Note on article 85333 (160 watts): Shorter panel dimensions due to connection box on the rear.

cover layer material:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Backing sheet material:

• TPT: Material with high flexural strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells.

Installation instructions:

All Flex modules must be fully bonded (without air pockets). All module edges must then be completely sealed up to the top cover layer.

Performance is significantly higher than comparable modules, especially at high temperatures. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens the installation time and, at 6/8 m long, is also sufficient for large vehicles. The above-average bendability also makes the Carbest modules ideal for maritime applications. We recommend an MPPT charge controller (e.g. 851005 or 851006)

Note on article 85333 (160 watts): Shorter panel dimensions due to connection box on the rear.

cover layer material:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Backing sheet material:

• TPT: Material with high flexural strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells.

Installation instructions:

All Flex modules must be fully bonded (without air pockets). All module edges must then be completely sealed up to the top cover layer.

Performance is significantly higher than comparable modules, especially at high temperatures. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens the installation time and, at 6/8 m long, is also sufficient for large vehicles. The above-average bendability also makes the Carbest modules ideal for maritime applications. We recommend an MPPT charge controller (e.g. 851005 or 851006)

Note on article 85333 (160 watts): Shorter panel dimensions due to connection box on the rear.

cover layer material:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Backing sheet material:

• TPT: Material with high flexural strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells.

Installation instructions:

All Flex modules must be fully bonded (without air pockets). All module edges must then be completely sealed up to the top cover layer.

Performance is significantly higher than comparable modules, especially at high temperatures. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens the installation time and, at 6/8 m long, is also sufficient for large vehicles. The above-average bendability also makes the Carbest modules ideal for maritime applications. We recommend an MPPT charge controller (e.g. 851005 or 851006)

Note on article 85333 (160 watts): Shorter panel dimensions due to connection box on the rear.

cover layer material:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Backing sheet material:

• TPT: Material with high flexural strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells.

Installation instructions:

All Flex modules must be fully bonded (without air pockets). All module edges must then be completely sealed up to the top cover layer.

Performance is significantly higher than comparable modules, especially at high temperatures. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens the installation time and, at 6/8 m long, is also sufficient for large vehicles. The above-average bendability also makes the Carbest modules ideal for maritime applications. We recommend an MPPT charge controller (e.g. 851005 or 851006)

Note on article 85333 (160 watts): Shorter panel dimensions due to connection box on the rear.

cover layer material:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Backing sheet material:

• TPT: Material with high flexural strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells.

Installation instructions:

All Flex modules must be fully bonded (without air pockets). All module edges must then be completely sealed up to the top cover layer.

Performance is significantly higher than comparable modules, especially at high temperatures. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens the installation time and, at 6/8 m long, is also sufficient for large vehicles. The above-average bendability also makes the Carbest modules ideal for maritime applications. We recommend an MPPT charge controller (e.g. 851005 or 851006)

Note on article 85333 (160 watts): Shorter panel dimensions due to connection box on the rear.

cover layer material:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Backing sheet material:

• TPT: Material with high flexural strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells.

Installation instructions:

All Flex modules must be fully bonded (without air pockets). All module edges must then be completely sealed up to the top cover layer.

Performance is significantly higher than comparable modules, especially at high temperatures. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens the installation time and, at 6/8 m long, is also sufficient for large vehicles. The above-average bendability also makes the Carbest modules ideal for maritime applications. We recommend an MPPT charge controller (e.g. 851005 or 851006)

Note on article 85333 (160 watts): Shorter panel dimensions due to connection box on the rear.

cover layer material:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Backing sheet material:

• TPT: Material with high flexural strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells.

Installation instructions:

All Flex modules must be fully bonded (without air pockets). All module edges must then be completely sealed up to the top cover layer.

Further specifications:

• Sunpower cell count: 36 cells
• Material cover layer front and rear: ETFE
• Material carrier plate: fiberglass (black)
• Dimensions LxWxH (height connection box): 1235 x 540 x 4 (approx. 22 ) mm

Performance is significantly higher than comparable modules, especially at high temperatures. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens the installation time and, at 6/8 m long, is also sufficient for large vehicles. The above-average bendability also makes the Carbest modules ideal for maritime applications. We recommend an MPPT charge controller (e.g. 851005 or 851006)

Note on article 85333 (160 watts): Shorter panel dimensions due to connection box on the rear.

cover layer material:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Backing sheet material:

• TPT: Material with high flexural strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells.

Installation instructions:

All Flex modules must be fully bonded (without air pockets). All module edges must then be completely sealed up to the top cover layer.

Performance is significantly higher than comparable modules, especially at high temperatures. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens the installation time and, at 6/8 m long, is also sufficient for large vehicles. The above-average bendability also makes the Carbest modules ideal for maritime applications. We recommend an MPPT charge controller (e.g. 851005 or 851006)

Note on article 85333 (160 watts): Shorter panel dimensions due to connection box on the rear.

cover layer material:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Backing sheet material:

• TPT: Material with high flexural strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells.

Installation instructions:

All Flex modules must be fully bonded (without air pockets). All module edges must then be completely sealed up to the top cover layer.