Suchergebnisse VOTRONIC
Für die Filterung wurden keine Ergebnisse gefunden!
Votronic main switch with 20 A automatic fuse
801305
Switching electrical units and securing circuits and, according to one's wishes putting together and marking proper individually. These are the features of these control units and switchgears. Equipped with automatic fuses the annoying search for the fitted replacement fuse has an end. As per push of a button the operational readiness is recuperated again. The versatile utilisation possibilities allow the user in putting together a complete motor home control center.
- Robust main switch with 20A overcurrent switch (automatic circuit breaker)
- Thermal triggering, high overload capacity for short periods of time
- Tripping at more than 20 A continuous current with backlash of the rocker switch
- suitable for 12 V and 24 V
Pictogram-foil black self-adhesive
801200
For the proper marking of switches and fuses, international understandable caption sheet. This pictrogram-foil is transparent, self-adhesive and suitable to the VOTRONIC front panel design abrasion-proof imprinted.
- black printed, transparent, suitable for light/silver surfaces
- pre-punched, abrasion-resistant, dimensions of pictograms approx. 12x10 mm
Switch Unit 40
81295
The VOTRONIC Switch Units operate on the basis of a bistable power relay. Their own consumption is extremely low. They are particularly suitable as remote-controlled main switches or as load relays, which should remain switched on for a long time. The current carrying capacity is 40 A.
- Simple control via simple ON / OFF switch
- High switching currents, briefly highly overloadable
- Externally visible switching status display
- Automatic switch-off at undervoltage 8.5 V
Battery monitor - Protector 100A
81214
The connection is made to solid M6 threaded bends. It can be remotely switched via a normal 1-pole switch. With emergency ON function. Suitable for all battery types. Pre-alarming enables countermeasures to be taken at an early stage. 12 V/24 V VOTRONIC 3078.
Power Control Jupiter 100 with Smart Shunt 100 A
801155
Votronic Power Control Jupiter Multi-Panel System for motorhomes VPC Jupiter 100 with Smart Shunt 100A With full functionality of the LCD battery computer & solar computer, indoor and outdoor thermometer, clock, fuel gauge for fresh and waste water tank, pump main switch (up to 16A) and main switch. Including programmable deep discharge protection (% residual capacity), with double USB charging socket (5V/2.5A)
- Information as numerical values and bar graphs
- Simple, intuitive operation
- Large, white illuminated graphic display
- Compact design
- Simple assembly
LCD-Voltmeter S
801151
This digital measuring device optionally displays the voltage of the on-board battery and the starter battery. The stresses are displayed as exact numerical values. The additional bargraph display works in the range from 10.5 to 15 volts and thus represents the most interesting range of battery voltage, from deep discharge to maximum charging voltage, clearly and at a glance. When the device is installed, 12V or 24V operation is set once for this function. In 24V operation, the range then...
Bluetooth Connector S-BC incl. Energy Monitor App
80144
Consists of a special communication module (Bluetooth Connector S-BC) which, in conjunction with a Votronic Solar Charge Controller (from 2013) with LCD-Solar Computer S and/or the LCD battery Computer S or VPC Jupiter with Smart Shunt, additionally transmits all values to a mobile device via Bluetooth. The required app for Android or iOS is available free of charge from the Google Play Store or iOS App Store. The connection of the module is very easy via plug-and-play. All information of the...
D+ Simulator Pro
812220
The VOTRONIC D+ Simulator Pro generates the control signal by detecting the vibrations of the running engine. It works fully automatically and independently of the charging operation of the alternator and is therefore particularly suitable for vehicles that have an alternator management, this can be, for example, vehicles according to Euro 6 standard. With its low current consumption of less than 3mA, it meets the requirements of DIN EN 13976. Switching output: max. 0.3 A (+ switching,...
- Suitable for all vehicles with combustion engine
- No intervention in the vehicle electronics
- Display of device status via three-color LED
- Additional voltage monitoring
- Adjustable switch-off delay
Fresh water tank indicator S
801160
This VOTRONIC tank gauge was designed for accurate level measurement and can be used for all tank materials and tank sizes. The fill level of the tank is displayed as a clear light bar with 10 LEDs in three colors, which allows the exact detection of the tank level at a glance. The display is even stepless, as intermediate levels are displayed with variable brightness, thus also making tendencies immediately recognizable. When filling and emptying the tanks, the continuously rising or falling...
- The filling levels of the tank are displayed as clearly arranged light bars with 10 LEDs each in three colors
- The displays operate steplessly
- The display can be switched on and off at the touch of a button
- Automatically switches off again after approx. 10 minutes
- Small front panel dimensions and the particularly low installation depth of only 18 mm allow mounting in almost any location
- Protected against wrong polarity and overload
LCD Battery Computer 100 S
801094
How much residual charge does my on-board battery actually still have? Is the battery really full? Why is energy being drawn from the battery despite consumers being switched off? The VOTRONIC LCD Battery Computer S answers these questions to the exact percent (%) and ampere-hour (Ah). At the push of a button, it provides comprehensive information about the current state of charge of the battery, the flowing battery currents and the voltage level of the battery. Based on the extremely proven...
- Minimum battery capacity 50 Ah
- Battery voltage on-board battery 7 to 32 V (volts). internal measuring resolution 0.1 V
- Battery current (charge/discharge) +/- 0 to max. +/- 1800 A, internal measuring resolution 0.1 A
- Battery voltage 2nd battery (e.g. starting battery), 7 to 32 V (volts), internal measuring resolution 0.1 V
- Switching output freely programmable and tactile (PNP, plus potential 12V / 24V, max. 0.5A)
Waste water-fuel indicator 12+24v without sensors
801170
This VOTRONIC fuel indicator has been designed for the excact fill level metering and is suitable for all tank materials and all tank sizes. The fill level of the tank will be displayed as a clear shadow column with 10 luminous diodes in three colours, which allows the exact coverage of the tank fill level at a glance. The display occurs even continuously, because the intermediate results are displayed in a variable brightness and therefore tendencies can be made visible at once. During the...
Faecal-fuel indicator 12+24V
801180
This VOTRONIC fuel indicator has been designed for the excact fill level metering and is suitable for all tank materials and all tank sizes. The fill level of the tank will be displayed as a clear shadow column with 10 luminous diodes in three colours, which allows the exact coverage of the tank fill level at a glance. The display occurs even continuously, because the intermediate results are displayed in a variable brightness and therefore tendencies can be made visible at once. During the...
Diesel-fuel indicator 12+24V
801190
This VOTRONIC fuel indicator has been designed for the excact fill level metering and is suitable for all tank materials and all tank sizes. The fill level of the tank will be displayed as a clear shadow column with 10 luminous diodes in three colours, which allows the exact coverage of the tank fill level at a glance. The display occurs even continuously, because the intermediate results are displayed in a variable brightness and therefore tendencies can be made visible at once. During the...
Battery Charger VBCS 30/20/250 Triple-CI
81291
The Battery Charger VBCS 30/20/250 is a combination of devices: VCC charger with30A, Pb mains charger with 20A and MPP solar regulator for max.250 Wp and ensures the power supply in the motorhome. The batteries are charged optimally at all times, whether on the road or on the pitch. Above all, the generously dimensioned charging power of the integrated charging converter with 30, 45 or 60A ensures that the on-board battery is charged with full charging current evenduring short...
- Automatic battery regeneration
- Connection remote operation / display
- Power limit function Mains / charging power reduction
- Temperature compensation
- Voltage sensor (for very long charging lines)
- Power supply function (battery replacement)
- Battery capacity (size) adjustable
- Silent Run function (night setback)
- Temperature sensor included
Battery Charger VBCS Triple 45/30/350
81292
The Battery Charger VBCS 45/30/350 is a device combination consisting of: VCC charging converter with 45A, Pb mains charger with 30A and MPP solar controller for max. 350 Wp and ensures the power supply in the motorhome. The batteries are optimally charged at all times, whether during the journey or on the pitch. Above all, the generously dimensioned charging capacity of the integrated charging converter of 30, 45 and 60 A ensures that the on-board battery is charged with full charging...
- Permanent, fully automatic battery charging
- High operational safety
- Fast and battery-saving charging
- Robust technology and compact design
- Simple installation and short cable runs
LCD-Solar-Computer 12V
810241
How much energy does my solar system actually deliver? Is the surface battery fully charged? Are the solar modules shaded, dirty or are they working properly? Does the power of the solar modules match the manufacturer's specifications or does the system deliver completely different values? All these questions can be answered directly and comfortably with the LCD-Solar-Computer S. The LCD Solar Computer S is simply connected to the VOTRONIC solar charge controllers by plug and play through the...
- Combination display for battery and solar power
- Large display
- Connection to SR and MPP controllers
Battery Charger VBCS 60/40/430 Triple
81293
The Battery Charger VBCS 60/40/430 is a device combination consisting of: VCC charge converter with 60 A, Pb mains charger with 40 A and MPP solar controller for max.430 Wp and ensures the power supply in the motorhome. The batteries are optimally charged at all times, whether while driving or on the pitch. Above all, the generously dimensioned charging power of the integrated charging converter with 30, 45 or 60 A ensures that the on-board battery is charged with full charging current even...
- Constant, fully automatic battery charging
- High operational reliability
- Fast and battery friendly charging
- Robust technology and compact design
- Easy installation and short cable runs
- Auxiliary charging branch for support charging and charge maintenance of the vehicle starter battery during long idle periods
- The supplied 12 V consumers are protected against overvoltage and voltage fluctuations
- The powerful charge converter (booster) enables the complete charging of the on-board battery while driving
- Battery training protects the unused (lead-acid) battery from rapid aging and failure due to sulfation during wintering, seasonal operation or extended idle periods
- The charging voltage is free from peaks and regulated in such a way that overcharging of the batteries is excluded
Solar charge controller MPP 170 CI
850214
MPP solar controller for high quality motorhomes, caravans and boats. Votronic solar controllers of the series "MPP" (Maximum-Power-Point) with "IU1oU2" charging characteristic are connected as a link between solar panel(s) and battery(s). With MPP technology, the controller continuously and automatically determines the maximum power point (MPP) of the solar panels several times per second. It then transforms the excess voltage of the solar module to a higher charging current for the battery...
- For solar modules with up to 170 Wp module output
- For solar modules with max. 10 A module current
- For solar modules with max. 60 V module voltage
- Charging possibility for 1 supply and 1 starter battery
- With charging characteristic for lithium batteries
10
found categories
12V Display Panel
25
Artikel
Battery Accessories
23
Artikel
Solar Charge Controller, MPPT Solar Charge Controller
23
Artikel
Battery Charger 12V
20
Artikel
Fuses & Distribution Boxes
13
Artikel
12v Inverter, 12v Pure Sine Wave Inverter
11
Artikel
Battery Guard
6
Artikel
Water Level Indicator
4
Artikel
Relais 12V
2
Artikel
Solar Panel for Shed, Solar Garden
1
Artikel